$ 139.00 $ 149.00
This D100 V2 is, upgraded generation of the D100 one, an AC / DC dual balance charger discharger. With two independent circuits, it can charge batteries of varying chemistries ( LiPo / LiHV / LiFe / Lilon / NiMH / NiCd / PB ) simultaneously. Capable of operating as a power supply with the maximum output of 100W helps the hobbyists to power the DC equipment. With its unprecedented function of voice guide, even a freshman can use this charger without any hurdles. Additional feature including our " SCAN TO GO " either.
Purposes to make the charger more user-friendly and customizable. A speaker supported English and Chinese separately have been included on the left side of the charger that can reduce the times for misoperation.
The charger supports power distribution between channel A/channel B and PSU under the total power of 100W in AC mode.
Scan To Go
A unique feature to make the charger set easier. Allows the users to assign a QR Code which contains all the relevant data for the battery for charging or discharging.
The users can create a unique QR code by " SkyCharger " app. Print it and paste it into the battery. Using your smartphone and launch " SkyCharger "app. Since all the essential information is stored in the QR Code, you need to do is press the Scan button, and the charge or discharge process will start automatically.
DC Power Supply
The ability to supply 100W/13.8V DC power dramatically expands its usage scope, which is really an amazing partner for hobbyists to power the DC equipment.
SKYRC D100 V2 allows you to plug 2 batteries into one charger simultaneously, and it will intelligently and automatically charge 2 batteries at once.
The Bluetooth 4.0 connectivity allows the user to remote control and monitors the D100 V2 comfortably through an app on a portable device such as a smartphone. Explicit pairing is not required; after APP download and installation just activate Bluetooth on your mobile device and launch the app. D100 V2 and your device will establish Bluetooth connection automatically.
The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in real-time graphs, and can also control charging and update firmware from "Charge Master".
AC Input Voltage: 100 - 240V
DC Input Voltage: 11 - 18V
Charge Wattage: AC: 100W ( support power distribution ) / DC: 2 x 100W
Discharge Wattage: 2 x 10W
Charge Current: (0.1 - 10.0A ) x 2
Discharge Current: ( 0.1 - 2.0A ) x 2
DC Power Supply Output: 13.8V / max 100W
Current Drain for Balancing Port: 300mA/cell
Trickle Charging Current: 50 - 300mA and OFF
LiPo / LiFe / Lilon / LiHV Battery Cell Count: 1 - 6S
NiMH / NiCd Battery Cell Count: 1 - 15S
Pb Battery Voltage: 2 - 20V
Provides switch AC power to your box Panel mount : Screw-on version from front or rear side, snap-in version from front side 2 Functions : Appliance Inlet Protection class I...
Product 4-Position Barrier Strip Terminal Block 8 Contacts, 4 Positions Features:Low profileCurrent rating: 15ADouble rowTerminals: Brass, nickel-platedInsulator: Thermoplastic, UL94V0Screws: #6-32, Phillips/Slotted, Steel/Zinc chromate-plated
Input: DC 3 V to 40 V (input voltage must be 1.5 V higher than the output voltage, no boost) Output: DC 1.5 V to 35 V voltage is continuously...